Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Step 5
password
5005
> OK
> CANCEL
Step 7
password
5005
OK
> CANCEL
If the password has been correctly entered, the CONFIGURATION
menu is accessed (step 8).
The following parameters can then be configured from this menu:
LANGUAGE. This allows the software language to be selected from
English, French and Spanish.
NETWORK. This allows the telephone company that is contracted
for the data connection to be selected from a list. If the relevant
company does not appear on the list, the necessary communications
information can be entered from the EDIT section. These APN
parameters are provided by the telephone company.
PIN. Allows the SIM card PIN to be entered. If the SIM card is
blocked it must be inserted into a mobile telephone to unblock it.
SERVER. Select and configure the server to which the XEOLUM is
connected.
• ORBIS SERVER. The default IP address and the ORBIS
server port for accessing the equipment via the XEOLUM
application.
• SERIAL CONNECTION. For the connection of external IP
gateways (Ethernet and Wi-Fi etc). Communication is via the
RS485-2 port.
• EDIT. This is where the various network values are configured.
- SRV: Server address domain.
- IP: Server IP address.
- PORT: Server connection port.
INITIAL CONFIGURATION.
FACTORY MENU.
Step 6
password
5005
> OK
> CANCEL
Step 8
configuration
LANGUAGE
> NETWORK
> PIN
TECHNICAL SPECIFICATIONS
Voltage rating:
230 Vac
Self-consumption:
4.8 VA
Display:
Alphanumeric 4x20, backlit LCD
Operating temperature:
-10ºC to +45ºC
Transport and storage
temperature:
-20ºC to +60ºC
Protection type:
IP20 according to EN 60529
Protection class:
II according to EN 60335 correctly installed
Auxiliary inputs:
10 opto-coupled, 230 Vac
Auxiliary outputs:
4 voltage-free relays 5 A / 230 Vac
Analogue inputs:
1 input 0 – 10 V
1 input 0 – 20 mA
1 external NTC temperature sensor input
Communications ports:
1 RS232 serial port
1
communications
1 RS485 MODBUS serial expansion port
Analysers:
2 complete analysers with three-phase
voltage
(transformers are supplied for an analyser)
GSM module:
SIM card holder, 3 V, 1.8 V with extraction
button
Four-band EGSM 850 / 900 / 1800 / 1900
MHz
GPRS Class 12 (86 kbps Up and Down)
Power:
- Class 4 (2 W) @ 850 / 900 MHz
- Class 1 (1 W) @ 1800 / 1900 MHz
Sensitivity:
- 107 dBm (typ.) @ 850 / 900 MHz
- 106 dBm (typ.) @ 1800 / 1900 MHz
Antenna:
Frequency range: 900 / 1,800 MHz
Gain: 6 cm 0 dBi; 22 cm 3 dBi
Reference Standards and Directives
Directive 2004/108/CE
(CEM) Electromagnetic Compatibility
Directive 2006/95/CE
(LVD) Low Voltage
Directive 1999/05/CE
(R&TTE)
telecommunications terminal equipment
EXTERIOR DIMENSIONS
160
ON
GSM
IR
SERVIDOR
ERROR
RS485
serial
port
for
and
current
measurement
Radio-electrical
58
ESC
ENTER
Página 5 de 6
ESDONI
and
Publicidad
Tabla de contenido
