CSL 41239 Manual De Usario página 9

4 Use
Please charge the 2in1 Transmitter/Receiver completely before using it for the first
time. Connect the device to a suitable power source such as a computer or USB
charging adapter using the micro USB cable. The LED will be red when charging.
When the device is fully charged, please disconnect it from the power source to
avoid constant recharging.
Hold the On/Off/pairing button down for 6 seconds to switch the device on. If you
have already established a connection to a Bluetooth device, connection is made
to this device automatically when you switch on. To turn the device off, hold the
On/Off/pairing button down for 3-4 seconds.
Please continue with Chapter 5 or 6 if you have not yet established a connection.
The 2in1 Transmitter/Receiver turns itself off automatically in order to save power
if no connection has been established within 5 minutes.
5 Establishing a connection in "Reception mode"
In this mode you can transfer music signals transmitted via a Bluetooth device to
other devices such as a hi-fi system. First make sure that the 2in1 Transmitter/Re-
ceiver is switched off. The LED display next to the On/Off/pairing button does not
light up in the process. Set the switch to position RX to activate reception mode.
Now connect the 2in1 Transmitter/Receiver to the signal input of your output
device (AUX) using the enclosed jack connecting cable. Hold the On/Off/pairing
button on the 2in1 Transmitter/Receiver down for approx. 9 seconds until the LED
starts to flash alternately red and blue. Now activate Bluetooth on the transmitter
with which you want to play your music. Next conduct a scan and connect to
the "CSL-41239" device. Select: Establish link or connection. The standard main
password is "0000" if you are asked for it. The connection is established and the
LED flashes blue twice at intervals. You can now start to play the music. Pairing
mode ends automatically after 2 minutes, and the device switches automatically
to standby mode if no device has connected to it.
Note: Make sure that you have selected the correct signal input source on your hi-fi
system. Please reduce the volume before you start to play the music.
English 9