HoMedics iSoundSpa Max Manual De Instrucciones E Información De Garantía página 8

5. Toggle through the AL MODE BUTTON (Fig. 1) until the WAKE MODE
ICON appears on the right side of the LCD to indicate the wake mode
of your choice: iPod, radio, sounds or beep (Fig. 2).
Note: To wake to iPod/iPhone, your iPod/iPhone must be properly
docked in the unit, or alarm will default to beep wake mode.
Note: When using the sound mode, the unit will set to the last
sound you listened to. If you wish to change it, first, turn the power
on, then press the sound you wish to wake to. Lastly, turn the
power off.
6. When the alarm is sounding, press the POWER BUTTON on the unit to
turn the alarm OFF (Fig. 1). The alarm will come on again the next day
at the same time.
7. To stop the alarm from coming on the next day, toggle through the
AL1/AL2 BUTTON located on the top of the unit until the AL1 & AL2 BELL
ICONS disappear from the LCD display, indicating the alarm is disarmed.
Note: If the alarm sounds for 30 minutes continuously it will
automatically turn off and reset to come on again at the same time
the next day.
1 4
Setting Alarm1 and Alarm2 (Together)
1. Toggle through the AL1/AL2 BUTTON (Fig. 1) located on the top of the
unit until BOTH AL1 & AL2 BELL ICONS appear on the LCD display to
indicate both alarms are activated (Fig. 2).
Note: You cannot change the alarm time when BOTH are selected.
If you need to change the alarm time for either alarm, follow step 1
under Setting Alarm 1 or Alarm 2 (Individually).
2. Toggle through the AL MODE BUTTON (Fig. 1) until the WAKE MODE
ICON appears on the right side of the LCD to indicate the wake mode of
your choice: iPod, radio, sounds or beep (Fig. 2). Both AL1 & AL2 must
wake to the same mode.
Note: To wake to iPod/iPhone, your iPod/iPhone must be properly
docked in the unit, or alarm will default to beep wake mode.
Note: When using the sound mode, the unit will set to the last
sound you listened to. If you wish to change it, first, turn the
power on, then press the sound you wish to wake to. Lastly,
turn the power off.
3. When the alarm is sounding, press the POWER BUTTON (Fig. 1) on the
unit to turn the alarm OFF. The alarm will come on again the next day at
the same time.
4. To stop the alarm from coming on the next day, toggle through the
AL1/AL2 BUTTON (Fig. 1) located on the top of the unit until the AL1 &
AL2 BELL ICONS disappear from the LCD display, indicating the alarms
are disarmed.
Note: If one of the alarm users still needs their alarm set, you will
need to toggle through the AL1/AL2 BUTTON located on top of the
unit until the AL1 or AL2 BELL ICON appears on the LCD to
correspond to the alarm of their wake time.
Note: If the alarm sounds for 30 minutes continuously it will
automatically turn off and reset to come on at the same time the
next day.
1 5