Maintenance And Storage - Lanaform Aqua Relax Manual Del Usuario

BATH MAT
EN
FIXING THE BATH MAT
1. Put the mat in the empty bath and press down to x the suction pads.
2. Insert the "valve" marked with an arrow located at the end of the tube on the main unit ( g.: 6.1). To secure it in place, turn the end of the tube until the
arrow is next to the closed padlock ( g.: 6.2).
3. Insert the other end of the tube in the hole in the mat ( g.: 7.1 and 7.2).
4. With dry hands, plug in the device and switch on the power.
USING THE BATH MAT
Once everything has been set up, you can ll your bath and use your mat.
You can control your bath mat with the main unit or the remote control.
1. Switching on
To switch on your AQUA RELAX, press the On/O button ( g.: 1, button D or g.: 4 button H).
Your AQUA RELAX will automatically switch o after 60 minutes if you have not speci ed another time. If you want to switch it o before the chosen time is up,
press the On/O button ( g.: 1, button D or g.: 4 button J).
2. Timer
Your bath mat is preset to stay on for a maximum of 60 minutes. You can select another time from the options available (10, 15, 20, 30 or 60 minutes). The
recommended time is 20 minutes.
To change this, press on the time control button ( g.: 1, button B or g.: 4, button G). A light on the main unit will tell you which time you have selected.
3. Programme
Your AQUA RELAX gives you 4 di erent options for automatic massages and 1 manual option.
The 4 automatic massage options are:
Programme P1 is a soothing massage.
Programme P2 is an invigorating massage.
Programme P3 is a relaxing massage.
Programme P4 is a deep tissue massage.
To select the programme you would like, press the programme control button ( g.: 1, button C or g.: 4, button H) until the light on the main unit is next to the
programme you want.
If you choose an automatic programme, you cannot adjust the intensity.
4. Intensity
This manual massage option produces jets of water at a constant pressure without any variation. You can choose one of 3 levels of intensity: low, medium or high.
Choose your preferred level of intensity by pressing the power control button ( g.: 1, button A or g.: 4, button I). The light will appear next to the power level you
have selected on the main unit. If you choose the manual option, you cannot choose from the 4 automatic programmes described above.

MAINTENANCE AND STORAGE

Storage
• Store the AQUA RELAX in its box and put it away in a dry place as soon as it is dry.
• Keep the bath mat away from sharp edges and other sharp objects that could cut or pierce the surface.
• To avoid damaging the power lead, do not wind it around the main unit.
• Do not hang the unit by the manual control lead or the power lead.
Cleaning
• Unplug the main unit and remove the tube from the main unit and the mat. Wait for a few minutes before cleaning.
• Clean the main unit with a soft, damp sponge, and the mat with a cloth and soapy water.
• Never let water or any other liquid come into contact with the main unit.
• Do not immerse it in liquid to clean it.
• Never use abrasive detergents, brushes or thinners to clean it.
The AQUA RELAX is designed for personal use. It does not have any components that need to be maintained by the user. If you have any problems, take the device
to your supplier or its after-sales department to be examined and repaired.
6