Key Features; Connection Diagram - Alesis JAMDOCK Manual De Inicio Rápido

INTRODUCTION
Welcome to the Alesis JamDock iPod Player! Use the JamDock to
integrate your iPod directly into your private practice and public
performance.
JamDock sends your iPod's audio to its built-in analog outputs and
headphone output.
keyboards, or a guitar) through JamDock's two line inputs. Set the
JamDock on a flat surface, or mount it on a rack or stand via an Alesis
e-percussion Module Mount (sold separately).
We designed JamDock to be easy to use, but please refer to this manual if you have any questions about
how it works. Enjoy your JamDock!
Sincerely,
The People of Alesis

KEY FEATURES

Compatible with the following iPod models:
rd
o iPod 3 through 5
o iPod nano 1
o iPod touch
Powers iPod while docked
Two 1/4" switchable line/guitar inputs, summing to mono
Two 1/4" stereo line outputs
1/4" stereo headphone output
Main volume and input volume knobs
Can be used as a tabletop device or mounted on a rack or stand with an Alesis e-percussion Module
Mount (sold separately)
Kensington® lock slot

CONNECTION DIAGRAM

Power
PA system,
monitors, etc.
Headphones
(1/4" stereo)
WARNING: Turn
MASTER VOLUME all the
way down before turning
on the unit.
Blend in other line instruments (such as mics,
* iPod is a trademark of Apple Inc., registered in the U.S.A. and other countries
th
Generations and iPod classic
st th
through 4 Generations
the
Note: When using a guitar, plug it into the
"GTR/LEFT" input and select "GUITAR" with the
INPUT SELECTOR on the side panel.
iPod
1
BOX CONTENTS
JamDock iPod Player
AC Power Adapter
Quickstart Guide
Safety Instructions & Warranty
Information Booklet
Mics
(1/4" mono)
or
Guitar **
(1/4" mono)
or
CD player,
sampler,
drum
machine, etc.
(1/4" stereo)