Product Details; Technical Specifications - Marmitek BOOMBOOM 100 Modo De Empleo

If the LED then starts to flash red/blue again, you can slide the
multifunctional switch back to the centre position for the optical
connection (OPT), or completely to the left for the analogue
connection (AUX).
The BoomBoom 100 is now in pairing mode and all previously
paired devices have been deleted from its memory.
Continue with point 4.2.3 or point 4.3 to pair your Bluetooth
device.
6

Product details

6.1

Technical specifications

General specifications
DC Power
Power Consumption
Bluetooth
Control
Connection
Supported Bluetooth profiles
Supported Codec
Supported Codec
No aptX or AAC support
Audio Latency
Support Multiple pair
Support multiple connect (TX)
Electric Performance – RF
Bluetooth version
Chip
Range
Input
Interface Audio Input
12
5V USB-A
< 0.2W
Auto Pairing and connection
up to two Bluetooth devices (BT 3.0 or
higher)
A2DP
SBC, AAC, aptX, aptX Low Latency
SBC, AAC, aptX, aptX Low Latency
(single-mode only)
links with SBC
SBC, 170 ms - 270 ms
AAC, 90 ms - 150 ms
aptX, 60 ms -80 ms
aptX Low Latency, 32 ms - 40 ms
up to 8 devices
Up to 2 devices simultaneously.
V4.1, class 2
CSR
Up to 10 meters with Class 2> <2
connection
Up to 15 meters with Class 2> <1
connection
Jack 3.5 mm stereo
Toslink Digital stereo
© MARMITEK