Charging Direction; Trouble Shooting - PUPPYOO WP536 Manual Del Uso

Charging direction

When the battery is full, press the main switch, the three power indicator light on the main body
will be green, the indicator on the battery pack part will also be green;
The indicator on the main body will be extinguished one by one with the decrease of the power
and the indicator on the battery will also gradually become orange and red;
Please charge the machine in time while the machine power is low;
When the voltage is too low, in order to protect the battery, the vacuum cleaner will appear
automatic power-off protection, and the machine need to be charged at that time.Insert the
plug of the adapter into the AC power socket, plug the output into the charging mouth of the
battery pack,the charging indicator on the battery pack assembly is red at that time, It indicates
the vacuum cleaner is charging.(The input voltage of the adapter is 100-240V AC, the output
voltage is 26V DC, please don't charge other appliances with this adapter);
After charging 2-3 hours later, then the indicator on the battery pack changes from red to
green, it indicates the battery is fully charged, please unplug the adapter from the AC outlet in
time(After charging full, please unplug the charging adapter output plug).
Attention:
01). When the charging indicator appears frequency 2 times / sec, alternately blue / green
flashing, please promptly sent the machine to the maintenance department for repair;
02). The vacuum cleaner is equipped with charging hang up function. When the vacuum
cleaner in the charging process, the charging indicator is red, Even though press the switch
button, the vacuum cleaner can not start.

Trouble shooting

Fault
Cleaner doesn't start
Reduced suction
The charging indicator
light fails to turn red
during charging ("red"
indicates the status of
charging)
Insufficient application
time after charging
Roller brush stop
working
Cause
Flat battery
1. The dust canister is full of dust;
2. Filter is blocked;
3. The air way is blocked.
The cleaner is not fully inserted to the
charging adapter or The charging
adapter is not connected to mains
power.
1. Insufficient charging time;
2. Normal discharge reduction in
battery.
1. Suck big objects;
2. Twined too many fibers.
Solution
Charge the vacuum cleaner
1. Empty the dust canister;
2. Clean or replace the filter;
3. Clear the air way.
Insert the cleaner to the charging
adapter and connect adapter to the
mains power.
1. Fully charge the battery according to
the instruction described in the
charging adapter;
2. Purchase a new battery.
Clean roller brush and restart vacuum
cleaner.
19