Adjusting The Orientation Of The; Projector - Epson ELPMB60 Guia De Instalacion

Installation Procedure
Adjusting the Orientation of the Projector
You can use the ball joint on the projector support section to adjust the orientation and the angle of the

projector.

The range of angles available varies depending on the model you are using. For more details, see the User's
Guide supplied with the projector.
a
Press the power button on the projector or the remote control.
The projector turns on.
Caution
Before turning on the projector, make sure the mount is firmly secured.
b
Loosen the screw for the arm unit's ball joint with a hexagonal wrench (M6).
c
Adjust the orientation of the projector.
Make sure you support the projector from underneath while adjusting the orientation.
20