Kow Your Light/Changing Light - Aqua One AquaReef 300 Manual Del Usuario

GB
Know Your Light Unit
Reflector
Changing Light tubes
1. Turn power off and remove the light unit from the
aquarium.
2. Remove the stainless steal reflectors from the light
tubes. They clip onto the light tube.
CAUTION: the reflectors may have sharp edges.
3. Loosen off the screw caps from each end of the
tube.
4. Gently twist the tube either clockwise or anti clockwise
and slide it out from the tomb stone to remove.
5. Take screw caps off old tubes and place them onto
the new ones.
6. Reassemble the light unit in reverse order.
CAUTION: be gentle when reattaching the reflectors to
the light tubes.
Screw Cap
Lamp holder end cap
7. Prior to reinstalling the light unit on the aquarium,
plug it in and turn it on to ensure it is working correctly.
If you are not confident in performing this task, contact
a qualified electrician or take the light unit to you Aqua
One retailer for assistance.
6
T5 Fluro Tube