Installation - Midland M Zero Manual Del Usaurio

INSTALLATION

Nuts
Nuts
Washers
Screws
Screws
Washers
Bracket
Washers
Screws and
washers
Screws
Washers
Safety and convenience are the primary consideration for mounting any
piece of mobile equipment. All controls must be readily available to the
operator without interfering with the movements necessary for safe ope-
ration of the vehicle. Be sure all cables are clear of the brake, clutch and
accelerator. Also, thought must be given to the convenience and comfort
of passengers.
Another extremely important requirement is the ease of installation and
removal for those occasions when you might want to remove the unit for
service and maintenance.
The most common mounting position for a transceiver is under the da-
shboard directly over the drive shaft hump. Do not mount the transceiver
in the path of the heater or air conditioning air stream. Take your time
and plan your installation carefully. When you have determined the best
location for mounting, use the mounting bracket as a template to mark
mounting holes. Take care when you drill the holes that you do not drill
into wiring, trim or other accessories.
M Zero Instruction Guide | 5