Aube TH115 Serie Guía Para El Usuario página 12

Owner's Guide
Set the configuration switches
Configuration switches are on the back of the faceplate.
# Configurations
1 Display format
1
2
Early Start
3
Temperature control mode
1. Early Start is used in Automatic mode only. When Early Start is enabled (on), the thermostat
determines when to start heating so the Comfort temperature is attained at the beginning of periods 1
and 3. When Early Start is disabled (off), heating starts only at the beginning of periods 1 and 3; thus
there is a delay before the Comfort temperature is reached.
2. See page 3. To select the F Mode, place the switch in the F position. To select the AF Mode, place
the switch in the AF position and ensure that the temperature sensor is connected to the thermostat.
To select the A Mode, place the switch in the AF position and ensure that the remote temperature
sensor is NOT connected to the thermostat.
Up
°F / 12 h
Enable
2
F
10
Down
°C / 24 h
Disable
AF