Package Contents; Installing The Speakers - Insignia NS-S6900 Guia Del Usuario

NS-S6900 6" × 9" 4-Way 90-Watt Car Stereo Speakers

Package Contents

• Speakers (2)
• Metal grills (2)
• Speaker wire (6 feet (3 m))
• Screws (8)
• Clips (8)

Installing the speakers

Note
Installation kits are available from your dealer or local stereo
shop to help make your installation easier. These kits also
give your installation a clean, custom appearance. If you
have questions about installations methods, see a
professional auto sound dealer or installer for help.
To cut mounting holes:
1 Make sure that the negative terminal on the vehicle battery is
disconnected.
2 Select a mounting location that has enough depth to
accommodate the speakers.
3 Use a included template to mark the cutting area. The template
diameter should be 8.62" × 5.87" inches (219 × 149 mm). Screw
hole diameters should be 5 mm.
8.62"
(219 mm)
Rear tray
4 Remove the vehicle panel that must be cut, then cut the hole in the
panel.
www.insignia-products.com
Template
5.87"
(149 mm)
7