Synchronizing & Color Changing - Duratech Spectra VISION DVS050 Serie Manual De Instrucciones

Synchronizing & color changing (for RGB and TW lamps only)
Manual synchronization
1. Switch ON the 12 VAC line voltage and make sure that all lamps light up.
2. Switch OFF the 12 VAC line voltage and wait for at least 20 sec
3. Switch ON and switch OFF
4. Switch ON and switch OFF
5. Switch ON
6. The lamps should now all be on color program 6: Blue
* TW lamps: the lamps will all flicker after 15 seconds on color program 6. You can now
choose to lock the lamp on a desired color program by switching off/on within the next
5 seconds. After 5 seconds the flickering will stop and the lamp is locked.
See next page for details.
If you did not select a color when flickering, the lamps will stop flickering after 5
seconds and the lamp will be unlocked.
Changing colors
Quickly turn the lamps OFF and back ON
The lamp will jump to the next color program
Memorizing the actual color
Turn the lamp OFF for MINIMUM 20 seconds
The last chosen color has now been memorized
16
(max 3 sec ON and max 3 sec OFF)
(max 3 sec ON and max 3 sec OFF)
(max 60 sec)