Descargar Imprimir esta página

Troubleshooting Tips; Important Notice - STI -3331 Manual De Instalación Y Funcionamiento

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting Tips

Problem
Does not sound
Receiver sounds randomly
All transmitters play the
same tune

Important Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
STI-3331
Changes or modifications not expressly approved by Safety Technology International, Inc. could void the user's
authority to operate the equipment.
Warranty
Safety Technology International, Inc. warrants to the original consumer/purchaser that this product shall be free
of defects in material and workmanship under normal use and circumstances for a period of one (1) year from
the original date of purchase.
Electronic warranty form at www.sti-usa.com/wc14.
Technical Support
Contact STI at 800-888-4784
Extender
• Check to make sure all wires to chime terminal strip are tightly
connected to correct screws.
• Make sure outlet is functioning.
• Check that receiver and sensor are within 500' operating range.
Range may vary depending on environment.
• Verify minimum outlet power to receiver is 110 VAC.
• Extender may not be compatible with all doorbells, especially
digital, musical doorbells.
• Verify power to existing doorbell is 16 VAC, 10VA.
• Make sure original doorbell is not stuck.
• Sounds for front and back doors are fixed.
• Be sure black and brown wires are not shorted together.
FCC ID: TXL3331
- 2 -
IC: 6335A-3331

Publicidad

loading