Technical Characteristics - EYEON 160202 Manual Tecnico

The central common area of 160202 is one of the main control unit
EN
of area that manages and controls all the associated peripherals,
such as relay modules or power players, internal and external control
modules, climate control, etc ...
The control common area is usually placed in the executive floor
for the management of the same, or in different switchboards according
to services control or management that must perform.
The control unit must be fed upstream of the electrical system for
ensure the power supply to the control unit with the disabled zone.
FEATURES
- ACCESS CONTROL CLIENTS OR SERVICE
PERSONNEL IN STRUCTURE
- MANAGE SIGNAL / ALARM DOOR AND
WINDOW OPEN ( INTRUSION )
- CHECK GENERIC ALARMS WITH
POSSIBILITY OF AUDIBLE WARNING
- CONTROL FUNCTIONS WITH
TIMING OR FORCING
- COMMAND ENABLE FAN-COIL /
VALVES, TWO OR FOUR TUBES
- CONTROL AND MANAGEMENT OF AREA
LIGHTS WITH TIMING SLOTS
- MONITORING OF TECHNOLOGICAL
SYSTEMS
- SELF-DIAGNOSIS AND CONTROL OF
PROPER FUNCTIONING OF DEVICE
Power supply voltage
Total absorption
inputs
Outputs 5A 230Vac
Open collector outputs
protection
Approvals
Operating temperature
Storage temperature
Relative air humidity

TECHNICAL CHARACTERISTICS

- ADDRESSING SOFTWARE UNIT ITSELF
- DIRECT REPROGRAMMING ALSO
BY THE SUPERVISION SOFTWARE 256
PARAMETERS
- MICROPROCESSOR WITH MEMORY
FLASH WHICH AVOIDS THE BACK-UP
BATTERIES
- ALL CONNECTORS ARE EXTRACTABLE
- MAINTAIN SETTINGS
ALSO IN THE CONTROLLER TURNED OFF
- COMPLETE WITH POWER SUPPLY
AND ITS FUSE 200MA
- INTERNAL COMMUNICATIONS: RS485
- EXTERNAL COMMUNICATION : CANBUS
- DIMENSIONS 160X90X73 (9 MODULES)
230 Vac 50Hz
max 10 VA
8 opto-isolated
4
4
IP 20
CE
0° to 50°C
-10° to +70°C
5 to 95% with no condensation