Appearance; Operation - PRO Intellect Technology PRO CL-200E Manual De Operación

2
1
1. Receiving tray.
2. Opening top cover. In case of banknote jam open the cover and remove the jammed
banknote.
3. '+' button switches on 'Add'/ off 'onE' mode of summing up nominal values. If hold '+'
button for 3 seconds, banknote supply mode switches (forward/backward).
4. 'C' button. Clears display values.
5. 3-digit LED display showing the quantity of counted banknotes.
6. 6-digit LED display showing the nominal of counted banknotes.
7. Power switch off.
8. Banknote supply mode indicators. The upper indicator corresponds with forward
supply mode, the lower one- backward supply.
3
1. By means of the supplied ac adapter connect the detector to the mains of 100-240V
50/60Hz.
2. Switch power on, Fig 1-7. Detector enters self testing mode. 'PRO CL-200' will be
displayed, wait for a few seconds. After self testing the detector is ready for operation.
The upper and lower display should display '0' value, see Fig.3.
3. If needed select banknote supply mode.
In case of forward supply mode, after a banknote is tested it will be placed from the left
side (as shown on Fig.2) and a banknote, which has not passed the test, will be placed
4
3
Figure 1

Appearance

5
6
8
7
2

Operation

5