Storing And Transporting Cable ("A" Frame Models); Accessories; Cable Selection - Ridge K-75A Manual Del Usuario

K-75A/B, K-1500A/B, & K-1500SP Drain Cleaning Machines
4 and 6 Tees 3 , 4 and 6 Y's
Figure 8 – Standard Cable Application
Heavy-Duty Cable Where conditions allow, heavy-
duty 1 1 / inch cable, such as C-14, should be used for
4
faster results and longer cable life. The heavy-duty cables
work effectively in 4 through 8 straight lines. (Figure 9)
NOTE! This type cable should not be used in areas
where 4 "P" traps or 4 running traps are cur-
rently in use.
6 to 8
Running Traps 4 to 8 Ells
Figure 9 – Heavy Duty Cable Application
Faster Cleaning Obstructions of grease or fats can
be cleaned faster and more effectively by bending the
cable some 6 or 8 behind the cutter. (Figure 10)
Bent Cable
Figure 10 – Bending Cable for Faster Cleaning
Storing And Transporting Cable
("A" Frame Models Only)
Cables can be stored and transported on "A" frame
models as shown in Figure 11.
3 , 4 and 6 Ells
4 to 8
Cleanouts
Figure 11 – Storing Cables On "A" Frame Models

Accessories

been designed to function with the Sectional Drain Clean-
ing Machines. Other accessories suitable for use with
other tools may become hazardous when used on the ma-
chines. To prevent serious injury, use only the recom-
mended accessories.
K-75A/B Machines
Cables and Leaders
Catalog
62275
30007
5 /
8
Catalog
51317
62270
62265
Ridge Tool Company
Only the following RIDGID products have
WARNING
Model
No. No. Description
C-10 15 All-Purpose Wind (4.6m)
T-127 7 / Trap Leader
8
Cables
Model
No. No. Description
C-9 10 Heavy-Duty (3m)
C-8 7 1 / All-Purpose Wind (2.3m)
2
C-7 7 1 / Tight-Wind (2.3m)
2
9