Publicidad
Enlaces rápidos
WARNING:
FOR YOUR PROTECTION, ALWAYS DISCONNECT
PUMP FROM POWER SOURCE BEFORE HANDLING.
2. Install rigid 1-1/2 in. discharge pipe, union,
check valve according to code.
4. Connect pump (A) power supply to a
GFCI-protected receptacle.
ITEM #0955622, 0955624
SUBMERSIBLE
SUMP PUMP
MODEL #148010, 148011
QUICK START GUIDE.
SEE INSTRUCTION
MANUAL FOR
COMPLETE DETAILS.
1-1/2-in discharge
pipe
Check valve
GFCI outlet
A
22 in.
1. Place pump (A) in a sump basin that is at
least 18 in. wide and 22 in. deep.
3/16-in
Vent hole
3. Drill a 3/16 in. hole in the discharge pipe, level
with the top of pump (A). Connect remaining
discharge pipe into main discharge line.
Fill with
water
5. Fill the basin with water to check operation.
Install a basin cover and gasket on top of
the basin.
A
18 in.
A
Basin cover
Printed in China
SW1128 B
Publicidad
Manuales relacionados para Utilitech 148010
Resumen de contenidos para Utilitech 148010
- Página 1 ITEM #0955622, 0955624 SUBMERSIBLE SUMP PUMP MODEL #148010, 148011 QUICK START GUIDE. SEE INSTRUCTION 22 in. MANUAL FOR COMPLETE DETAILS. WARNING: 18 in. 1. Place pump (A) in a sump basin that is at FOR YOUR PROTECTION, ALWAYS DISCONNECT PUMP FROM POWER SOURCE BEFORE HANDLING.
- Página 2 ARTÍCULO #0955622, 0955624 BOMBA DE SUMIDERO SUMERGIBLE MODELO #148010, 148011 GUÍA DE INICIO RÁPIDO 55,88 cm CONSULTE LOS DETALLES COMPLETOS EN EL MANUAL DE INSTRUCCIONES 45,72 cm 1. Coloque la bomba (A) en un contenedor para ADVERTENCIA: agua de sumidero de al menos 45.72 cm (18 PARA SU PROTECCIÓN, DESCONECTE SIEMPRE...