Whittaker Smart Care TRIO Manual Del Operador página 6

SAFETY ADVICE
Safety During Machine Operation
• On inclined/tilted surfaces, the tilt angle and the driving direction should not exceed the values given in this manual.
• Smoking or naked flames are strictly prohibited.
• Always allow the machine sufficient time to cool before carrying out any repair or maintenance work.
• Do not place hand or any object while the brushes are running.
• Suitable tools must be used for cleaning and maintenance work.
• Do not carry out any welding, drilling, sawing or grinding work on the frame sections. Damaged parts may only be
changed at an authorized service center.
• It is not permitted to use aggressive and corrosive cleaning agents.
• Maintenance work may be carried out by authorised dealer only.
• Always use appropriate tool and equipments while working on the machine.
• The cable must not chafe against anything. In the case of defective insulation, do not use the on-board charger.
• Do not use harsh chemicals to clean the machine.
This machine is not suitable for evacuation of dusts, which are explosive or dangerous to health.
Do not clean the machine by means of vapour jet or high pressure cleaning equipment.
( )
6