Using The Wireless Mouse; Troubleshooting; Legal Notices; Warranty - Dynex DX-LM100 Guia Del Usuario

DX-LM100_finalDTP_press.fm Page 4 Friday, March 31, 2006 7:50 PM
4

Using the wireless mouse

Controlling the mouse
This laser mouse has a high resolution of 1600 dpi, which provides the
most reliable and accurate movement.
• Avoid using the mouse on any reflective, transparent, metallic, or
complex-pattern surfaces such as glass or a mirror.
• Avoid using the mouse under the following conditions:
• Direct sunlight
• Extreme hot, cold, dusty, or magnetic environment
• Near a fax machine, television, radio, mobile phone or any
wireless device
• Press any button to wake up the keyboard or the mouse while the
mouse is in sleeping mode.
• Scroll the wheel to wake up the mouse while the mouse is in the
sleeping mode.
Using power-saving
The optical sensor can be turned off to save power.
To use the power-saving:
1 Press and hold the link button.
2 Press the scroll button to turn off the optical sensor.
Charging the mouse
The mouse scroll wheel will light when the mouse batteries are low.
Change or recharge the batteries immediately. Do not use the mouse
during while it is charging.
To charge the mouse:
1 Connect the cord of the receiver cradle to AC/DC adapter, then
connect the AC/DC adapter to the power outlet.
2 Place the mouse in the cradle and allow the mouse to charge.

Troubleshooting

If the mouse is malfunctioning, do one of the following:
• Change or recharge the batteries.
• Move the receiver away from the computer and the monitor and
repeat the set-up procedure on page 2.
• Make sure the USB port on the computer is working.
• Make sure that the receiver connector or cable is not broken or
tangled.

Legal notices

Radio and TV Interference Statement
This equipment has been tested and found to comply within the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
This Class B digital apparatus complies with Canadian ICES-003.
Copyright
© 2006 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy
Enterprise Services, Inc. Other brands and product names are trademarks
or registered trademarks of their respective holders. Specifications and
features are subject to change without notice or obligation.
Using the wireless mouse