Ceiling Installation; Assigning A Device Role - Yealink W80B Guia De Inicio Rapido

Ocultar thumbs Ver también para W80B:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

E
N
G
L
I
S
H
Note: When attaching the base station, we recommend that you make the screws protrude by
approximate 3 mm.

Assigning a Device Role

The W80B is shipped as a base station. Before registering a handset to the W80B, you
need to switch the W80B to the DM-Base role. Then, the W80B can work as a DECT
Manager and base station.
Switching to the DM-Base Role
Easy Switch:
1. Press
on the W80B three times quickly in one second.
Normal Switch:
1. Long press
flash green.
2. Press
three times briefly.
The ROLE LED indicator glows orange, and the DECT and LAN LED indicators glow
green. The device will reboot to make the change take effect.
Note: When you change the base mode, the time interval between each button press should
be less than 3 seconds. The device will return to the original mode after 30 seconds of
inactivity.
Base Mode Options
The following shows the LED status after the W80B connects to the power and
network:
Base Mode
Option
1
2
3
2
C
on the W80B for about 10 seconds till the three LED indicators slowly
Role
Base
DM
DM-Base

Ceiling Installation

DECT LED
ROLE LED
Off
Green
Off
Orange
Green
Orange
LAN LED
Green
Green
Green

Publicidad

Tabla de contenido
loading

Tabla de contenido