IMPORTANT: The vent at the base of the appliance is for ventilation. Nothing
should be placed in front of this vent; otherwise your Wine Cooler may not
operate properly.
o A decorative plinth can be fitted to the front of the base vent as long as the
cut out shown in the diagram below is made in the plinth. This cut out is
required whether the vent is removed or not.
HWCB 15
HWCB 30
HWCB 60
HWCB 60D
A. Cut-out Area
100mm
238mm
488mm
488mm
.26.
82mm
A. Cut-out Area
54mm
A. Cut-out Area
54mm
A. Cut-out Area
54mm