General Operation - SIOUX SRT10S Serie Instrucciones Y Lista De Piezas

GENERAL OPERATION

• For best results, the direction of the tool travel is generally from left to right.
• It is recommended that movement be counterclockwise on outside curves and clockwise on inside curves. The tool spindle rotates clockwise.
CHANGING CUTTING BITS
1. Disconnect tool from air line.
2. Remove nose piece assembly.
3. Hold collet stationary with a 9/16 (14.3 mm) wrench. Loosen collet retaining nut with 11/16 (17.5 mm) wrench.
4. Insert bit into collet to desired depth. Tighten collet securely. Replace nose piece assembly.
ADJUSTMENTS
1. Base plate may be adjusted to expose desired length of cutter edge by loosening the lock nut and rotating the nose.
SOUND AND VIBRATION READINGS
*Sound Pressure *Sound Power *Vibration
Catalog No. dBA dBA m/s
2
SRT10S 77.7 89.3 Less than 2.5
*per PN8NTC1 *per PN8NTC1 *per ISO 8662
3
ZCE768 2019October3/J
Form Date