IOGear SharePro GWHD2DKIT Guía De Configuración Rápide página 4

3
STEP 4
Insert the receiver into the HDMI port of your video display device
(TV, projector, etc.).
4
Receiver
STEP 5
Use one of the USB charging cables to connect to the micro USB port of the
receiver to a type USB-A port on the source device to obtain power. In a rare case
that the source device has no USB port, please use a 5V USB power adapter with
a minimum of 500mA output (not included in the package).
Receiver
5
STEP 6
The power LED (blue) will come on solid and a message will be displayed on your
TV/projector stating it is waiting for connection. After approximately 30 seconds the
wireless LED (red) on both the transmitter and the receiver will start to blink once
every second, the connection is now established.
STEP 7
Video from your source device will now be duplicated on your TV/projector.
NOTE: We recommend to use this device for line-of-sight use only as it is
designed as a short range device