Safety Notice; Charging Your Battery - Qstarz BT-Q1300ST Guía De Instalación Rápida

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
English
................................................................................................................................................................................................................

Safety Notice

Charging time is about 1 hour typically for this unit. We suggest
disconnecting the unit from PC after the unit has been fully
charged.
When the unit is not in use or not charged, we suggest
disconnecting the unit from the charger. Otherwise battery drain
may result.
Note that the built in battery cannot be charged outside the
temperature range 0℃ ~ 45℃.
Do not heat or leave the unit in high temperature or direct
sunshine for a long period of time as the built-in battery capacity
will deteriorate, or will become unchargeable.
Do not leave the unit staying below car's wind shield after car
parked during hot summer season. Some position below wind
shield may generate high temperature over 158℉/70℃. Such
temperature may melt the unit and damage the battery.
F. Charging your battery
For the first time using the BT-Q1300ST,
please charge battery until it is fully
charged. Take the USB cable and connect
it to the power jack (mini USB type) and
recharge through USB cable with PC. This
will begin to charge the battery. Charging
time is 1 hours typically. A fully charged
battery can last up to 10 hours
continuously operation (under 1Hz mode),
and 4 hours under 5Hz mode.
.........................................................................................................................................................................................
4
www.Qstarz.com

Publicidad

Tabla de contenido
loading

Tabla de contenido