Assembling The Acoustic Wall; Cleaning And Care Of The Product; Cleaning - sigel. Sound Balance Indicación De Montaje E Indicación De Uso

4.2

Assembling the acoustic wall

Warning
`
`
`
1
3
Fig. 3 Assembling procedure
The acoustic wall is assembled as follows:
1. Lay the acoustic wall on a soft surface, such as a carpet.
2. Attach the 2 metal feet to the connecting points with the 8 enclosed screws and the
enclosed hex key.
Ensure that the screws are turned tightly and that the metal feet have been mounted
securely before standing the acoustic wall upright.
3. Stick the 2 anti-slip pads over the screws on the metal feet.
4. Stand the acoustic wall upright and check that it is stable.
The acoustic wall is now assembled.
9
5

Cleaning and care of the product

5.1

Cleaning

Warning
`
`
`
We recommend regular cleaning to get the best out of your acoustic wall.
Dust and small amounts of dirt can be carefully removed with a vacuum cleaner, soft brush or soft
cloth.
The fabric surface of the acoustic wall can be cleaned with a dry or damp cloth. To do so, use a
soft microfibre cloth that has been moistened with water or alcohol-free detergent.
16
The acoustic wall should only be placed on level floors.
After positioning the wall, ensure that it is level and stable.
At least two people are required to assemble the acoustic wall.
Wear gloves while assembling the product to protect the fabric surface of the
acoustic wall from dirt and damage.
2
4
Do not use detergents containing alcohol, solvents or chlorine, as these can
damage the fibres on the fabric surface.
Always test alcohol-free detergent for colour-fastness before use on a small,
inconspicuous part of the product.
Do not rub or scrub the fabric surface.
2
Sound Balance acoustic wall