GB
Assembly instructions - RANGER 500
1 - Place the three side elements vertically as in the image
alongside.
2 - Using the round head screws provided, assemble the
hexagonal structure.
It is very important to assemble the three elements vertically
and on a surface that ensures excellent flatness so as to
obtain a reliable support surface for the closing flange.
Attention: The screw head must be placed on the internal
side of the foundation case.
See figure alongside.
3 - Fix the upper flange using the round head screws pro-
vided.
Attention: The screw heads must be placed on the upper
part of the flange (inside the case).
This way the foundation case is complete.
See figure alongside.
10 - RANGER