Time Setting; Power On/Off - QFX CV-100 Manual De Usuario

If a channel is found, it will be saved and added to the channels list. If channels can not
be found, it exits the menu automatically.
Signal Type
Our receiver supports both air and cable type of TV signal, please select the right signal
type here.
Modulation
CV-100 is not only compliant with NTSC analog TV (RF CH3/4) signal output, but also compliant
to split digital TV signal to other device.
When user sets at "CH ON", NTSC analog TV (RF CH3/4) signal output will be switched on
meanwhile, no digital signal is split or output to any external device. When user sets at "Loop through"
analog TV (CH3/4) output will be switched off. Meanwhile, digital TV signal split and output
will be switched on.

Time Setting

Press the MENU button then select (Time). The menu provides options to adjust the time
settings.
Press the UP/DOWN button to select an option and press the RIGHT/LEFT button to adjust
the setting. Press the EXIT button to exit the menu.
Time offset
Select auto or manual for GMT setting.
Country Region
S elect the right Country Region.
Time Zone
Select the right [Time Zone] when [Time Offset] is set to Manual.
Sleep
The receiver can go to standby automatically when you do not operate it for a period of
time. The time selection are:off, 1-12 hours.

Power On/Off

Press the menu button on the remote control, enter time, then select Power On/Off, this
screen will appear.
If you do not want this function, please select off.