Controls And Indicators - PSC Magellan 8100 Guía De Referencia Rápida

Weighing Items
The L-shaped All-Weighs
allows you to place items anywhere
on its surface, including leaning
against its vertical section, to be
weighed accurately.
Once weighed items are in place, enter
PLU (price Look-Up) data as
described in your POS system instruc-
tions. Item weight is displayed on the Remote Display and/or the host display.

Controls and Indicators

The control panel consists of two
indicator LEDs and two push buttons
as described below.
Indicator LEDs
The green LED indicates scanner sta-
tus, and the yellow LED is primarily
used to show scale status as
described in Table 2 below:
Scale Zero Push Button
The Scale Zero Push Button is used for multiple functions (except it has no
function in a "scanner only" model):
PRESS
DURATION
Momentary
4 Seconds
a. Diagnostics Mode is meant for use by trained systems support personnel. Users
2
™
Table 1. Scale Zero Push Button Functions
FUNCTION
Zero Scale
Scale Diag-
nostics Mode
should not need to initiate this function under normal circumstances.
platter
L-Platter
Volume/Tone Push Button
Scale Zero Push Button
Speaker
When programmed to do so, the yellow LED should be
lit when no weight is on the scale, indicating scale at
zero. If it is not, press the switch to zero the scale.
This mode allows system support personnel to trouble-
shoot problems with the scale. Momentarily press the
a
Scale Zero Push Button or cycle power to exit Scale
Diagnostics Mode.
Green LED
Yellow LED
COMMENT
®
Magellan 8100/8200