Setup / Connection Diagrams - Denon DJ AXIS8 Guia Del Usuario

User Guide (English)
Introduction
Box Contents
Axis Loudspeaker
Power Cable
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit denondj.com.

Setup / Connection Diagrams

You can set up your Axis loudspeaker in one of two ways:
Important: Please also see the following
•
Flat: Set the loudspeaker directly on a flat, stable surface (the floor or a low, sturdy table).
You can stack multiple Axis loudspeakers in a column, but make sure that all of them are
of the same model (Axis 8 or Axis 12) and that each loudspeaker's feet are placed firmly
in the 4 sockets of the unit beneath it.
•
Pole-Mounted: Carefully lift the loudspeaker and place the 36 mm hole in its bottom
panel over a standard 35 mm pole or speaker stand.
See the following examples of how to integrate the loudspeaker into your setup.
Note: Items not listed in
Example 1: 1 loudspeaker with vocal microphone and media player
Dynamic
microphone
Smartphone,
tablet,
MP3 player,
etc.
Connect a dynamic microphone to Input 1 using an XLR or 1/4" (6.35 mm) TRS cable. Make
sure the Line/Mic Selector is set to Mic. Connect a media player (smartphone, tablet, MP3
player, etc.) to Input 2's RCA connectors using a 1/8"-to-RCA (3.5mm-to-RCA) cable.
Note: Use only dynamic microphones with the loudspeaker unless you are also using an
external phantom power supply.
2
User Guide
Safety & Warranty Manual
Important Safety Instructions
Introduction > Box Contents
chapter.
are sold separately.
Power