Maintenance And Preserving - Edesa PMC Manual De Características, Utilización Y Conservación

CLEANING
In order to clean the appliance it is recommendable to firstly disconnect the same
from the mains electricity supply. Do not splash water on the electric components.
To clean the stainless steel use a sponge or cloth, tepid water and neutral soap.
Do not use abrasive products, solvents, metal cleaning liquids or undiluted detergents.
Dry with a cloth afterwards.
MALFUNCTIONING
Some problems are due to causes that are easily resolved without having to
contact the technical service. Please read the following table carefully:
PROBLEM
The appliance does not work.
Does not heat or heats up very
little.
All the basic checks have been
carried out and the problem
remains.
PROCEDURE
Check that it is correctly connected to the electricity socket and
that the fuses are in good condition and that the automatic
power limiter has not tripped.
Check the fluorescent or the halogen lamps (depending on
model). If any of them needs to be replaced, we recommend
contacting the Technical Assistance Service.
Contact your distributor or your Technical Assistance Service.
8