User Instructions; Installation Of Leveling Legs - Maxx Ice CLASSIC Serie Manual De Instrucciones, Instalación Y Mantenimiento

USER'S INSTRUCTIONS
Fig. 1

INSTALLATION OF LEVELING LEGS

1. Place the bin on its side (Fig 2).
2. Install the four leveling legs into bottom of ice storage bin. Ensure they are flush and snug with no
exposed threads.
3. Turn the bin upright.
Note: The use of a leveling tool is recommended to ensure that the ice storage bin and ice maker are level
and drain effectively.
4. Adjust the feet height individually to make both the ice storage bin and ice maker level.
Fig.2
Front Elevation
View
Leveling Legs
Leveling Leg
Rear Elevation
View
Module
Ice Maker
Ice
Storage
Bin
Adjustable
4
Gasket Interface
Brackets securing
Ice Maker to Ice
Storage Bin
Drain connection
point (3/4")