System Startup; System Software - Clevo W940TU Guia Del Usario Concisa

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. (Model B Only) Insert the battery and make sure it is locked in
position.
4. Securely attach any peripherals you want to use with the computer
(e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack on the left of the
computer, then plug the AC power cord into an outlet, and connect
the AC power cord to the AC/DC adapter (make sure you use the
adapter when first setting up the computer, as to safeguard the
computer during shipping the battery will be locked to not power the
system until first connected to the AC/DC adapter).
6. Use one hand to raise the lid/LCD to a comfortable viewing angle (do
not exceed 127 degrees); use the other hand (as illustrated in
Figure 1) to support the base of the computer (Note: Never lift the
computer by the lid/LCD).
7. Press the power button to turn the computer "on".

System Software

Your computer may already come with system software pre-
installed. Where this is not the case, or where you are re-con-
figuring your computer for a different system, you will find
this manual refers to Microsoft Windows 8.1.
4
Computer with AC/DC

Shut Down
Note that you should always shut your computer down by
choosing the Shut down command in Windows (see be-
low). This will help prevent hard disk or system problems.
Click Settings in the Charms Bar (use the Windows
Logo Key + C key combination to access the
Charms Bar) and choose Shut down from the Power
menu.
Or
Choose Shut down or sign out > Shut down from the
context menu (use the Windows Logo Key
combination to access the context menu).
127
ﾟ
Figure 1
Opening the Lid/LCD/
Adapter Plugged-In
+ X key