Transport And Interim Storage; Intended Use - Wilo IF Instrucciones De Instalación Y Funcionamiento

English

3 Transport and interim storage

Immediately check the IF-Module for any transit damage on arrival. If damage is
found, the necessary procedure involving the forwarding agent must be taken
within the specified period.
CAUTION! Danger of damage to the IF-Module!
Danger of damage due to incorrect handling during transportation and
storage.
The unit must be protected from moisture, frost and mechanical damage
during transport and interim storage.

4 Intended use

The Wilo IF-Modules Modbus and BACnet are designed for external control and
operating status signalling of pumps in the series
• Wilo-CronoLine-IL-E (from date of construction 10/2010)
• Wilo-CronoTwin-DL-E (from date of construction 10/2010)
• Wilo-CronoBloc-BL-E
• Wilo-VeroLine-IP-E (from date of construction 10/2010)
• Wilo-VeroTwin-DP-E (from date of construction 10/2010)
• Wilo-Economy MHIE (from software SW 3.00)
• Wilo-Multivert MVIE (1.1...4 kW) (from software SW 3.00)
• Wilo-Multivert MVIE (5.5...7,5 kW) (from software SW 4.00)
• Wilo-Helix VE (1.1 - 4 kW) (from software SW 3.00)
• Wilo-Helix VE (5.5 - 7.5 kW) (from software SW 4.00)
See list at www.wilo.de/automation for other types
The IF-Modules are not designed for safe deactivation of the pump.
22 WILO SE 11/2013