Speedlink Magic-i Manual Del Usuario página 8

DE
Important!
Before using this product please
EN
read all the safety and warning
notices given in the manual. Please
FR
also keep this manual in a handy place for future
reference.
ES
IT
Disclaimer of Liability
Jöllenbeck GmbH accepts no liability whatsoever
DK
for any product deficiencies or injuries caused to
people due to careless, improper or incorrect use
of the product or use of the product for purposes
not recommended by the manufacturer.
Troubleshooting/Repairs
Do not attempt to service or repair the product
yourself; leave any repairs to qualified personnel.
Do not attempt to modify the product in any way as
doing so will invalidate the warranty.
Moisture/Heat
Do not use the product near water (e.g. sinks, bath
tubs etc.), and keep it away from damp conditions;
areas where liquids are likely to drip, splash or
be sprayed; as well as rain. Do not expose the
product to high temperatures, high humidity or
direct sunlight.
8
Cleaning
Use a soft, dry cloth to clean the product. Do not
allow the product to come into contact with benze-
ne, paint thinners or other such chemicals.
Intended Use
This product is intended solely for transmitting
moving and static images on a standard computer.
The product must only be used in conjunction with
the original parts intended for it. The product must
only be used in dry, interior rooms. Intended use
includes adherence to the specified installation
instructions.
CE Conformity
This product meets the relevant CE guidelines of
the European Union. You can request a copy of the
conformity declaration in its entirety at http://www.
speed-link.com.