Installation Instructions; Install Batteries - AmazonBasics DF500 Manual De Instrucciones

Installation Instructions

Install Batteries

1. Open the battery cover
by sliding the cover in the
direction of the arrow labeled
"BATT PUSH".
E n g l i s h . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Fr a n ç a i s . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
D e u t s c h . . . . . . . . . . . . . . . . . . . . . . . . . . .16
2. Insert batteries according
to the polarity label on the I t a l i a n o . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3
inside of the battery cover.
E s p a ñ o l .. . . . . . . . . . . . . . . . . . . . . . . . . .3 0
日本 語. . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 3 7
中文 . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 4 4
3. Close the battery cover by
sliding the cover back into
the original closed position.
Note:
Use four AA Alkaline or Nickel Metal Hydride (Ni-MH) batteries.
n
Replace all four batteries at the same time. Do not mix different brands
n
and types of batteries. Do not mix old and new batteries. This may
cause overheating or an explosion.
If Flash will not be in use for a long period of time, remove the batteries.
n
Leaving the batteries in the Flash may result in damage due to leakage.
Do not use a leaking battery.
n
(not included)
7