Scan Settings; Audio Settings - Numan Mini One Manual Del Usuario

NOW PLAYING INFORMATION
While FM radio is playing, the screen shows its frequency, or if RDS information is available, station name and
any further 'RadioText' information. If no information is available, just the frequency and a No RadioText mes-
sage is shown.
To view further information about the broadcast press Info. Each time you press Info, the next set of informati-
on is displayed, cycling through: RDS Radio text, programme type, frequency, name, mono/stereo, power status,
and date. To return to the default Now playing screen: Press and hold

SCAN SETTINGS

By default, FM scans stop at any available station (All stations). This may include poor quality audio from weak
stations. Options: Strong stations only | All stations. To change the scan settings, to stop only at stations with
good signal strength select

AUDIO SETTINGS

By default, all stereo stations are reproduced in stereo. For weak stations, this may result in poor quality audio.
The audio quality can be improved using mono. Options: Stereo allowed | Forced mono.
To play weak stations in mono select
Menu > Scan setting then Strong stations only.
Menu > Audio setting > Forced
Info .
mono.
53