Model Specifications; Troubleshooting - Dri-Eaz Sahara ProX3 F351 Manual Del Propietário

A Y U
PPLYING OUR NIQUE

Locate the smooth area on the front side of the rotomolded
housing.

Clean the area with a standard household cleaner.

Once dry, apply a durable label using heavy-duty adhesive.
Height
Width
Depth
Static
Pressure
Motor
Sahara ProX3
Model F351
Power
For any problems not listed below, call your local distributor or contact our Service Department toll free at 888-867-3235.
PROBLEM
Unit does not operate
Unit vibrates excessively
07-01537C 2013-01 Warranty 07-00419
A L :
DHESIVE ABEL

Model Specifications

18.8" (48 cm)
17.0" (43 cm)
18.3" (47 cm)
1.36" (3.5 cm)
0.33 HP
4 amps

Troubleshooting

CAUSE
No power to machine
Switch not turned on
Blower wheel jammed
Intake or exhaust blocked
No power to outlet
GFCI tripped
Accumulation of soil on wheel
Speeds Three
Switch Type Rotary
2700 CFM
Rated Airflow
4587 CMH
1013 CFM
Tested Airflow
1718 CMH
Overheating Cut- Dual Thermal
offs Protectors
Cord Length 25 ft. (7.6 m)
SOLUTION
Plug in the unit; check circuit breaker or fuse
Turn on switch
Remove material jamming wheel
Turn machine off and allow to cool, then remove blockage
Reset circuit breaker/GFCI
Reset circuit breaker/GFCI
Clean blower wheel
4
Weight 27 lbs
Positions 3 (0°, 45°, 90°)
Carpet Available as ac-
cessory
Clamp
Circuit Pro- Circuit Breaker/
tection GFCI
Safety
UL / cUL listed
Marks
Polyethylene
Housing
Dri-Eaz Products, Inc.
4