Bluetooth Mode
To access a paired Bluetooth device:
1.
Press and release the Mode button until the Bluetooth icon appears on the screen.
2.
In Bluetooth mode, press and hold the Mode button for 2 seconds to see additional options.
3.
Use the |<< and >>| buttons to scroll through and press Play/Pause to select one of the settings seen
below.
BT Disconnect: This function disables the connection from the Bluetooth audio source.
EQ: Voice Rover provides 7 optional equalizer presets to enhance music. You may select from these EQ
settings:
• Normal (Nor)
• Pop (Pop)
• Rock (Rock)
• Jazz (Jazz)
• Classic (Clas)
• Country (Cou)
• Low Bass (Bas)
Delete Paired Info: Select this to "forget" a previously paired Bluetooth device so that Voice Rover will not re-
connect when switching back to Bluetooth mode.
Device Information: Shows information about Voice Rover's Bluetooth name.
Exit: Leaves the Bluetooth menu.
USB Mode
To access a connected USB device:
1.
Press and release the Mode button until the USB device icon appears on the screen.
2.
In USB mode, press and hold the Mode button for 2 seconds to see additional USB menu options.
3.
Use the |<< and >>| buttons to scroll through and press Play/Pause to select one of the settings seen
below.
Play Mode:
• All (A): Plays through and repeats all of the tracks on the USB device.
• Repeat One (1): Plays and repeats the current track.
• Repeat Folder (F): Plays through the tracks in the current folder and then restarts playback of the tracks.
• Normal (N): Plays through the tracks on the USB device.
• Random (R): Selects a random track to play.
• Browse (I): Plays the first 10 seconds of each track on the USB device.
EQ: Voice Rover provides 7 optional equalizer presets to enhance music. You may select from these EQ
settings:
• Normal (Nor)
• Pop (Pop)
• Rock (Rock)
• Jazz (Jazz)
• Classic (Clas)
• Country (Cou)
• Low Bass (Bas)
Change Device: Allows you to change from listening to the SD card or to a connected USB drive.
Exit: Leaves the USB Mode menu.
7