Descargar Imprimir esta página

Helvex E-2118-DX Vertica Guia De Instalacion página 6

Publicidad

Posibles Causas y Soluciones / Troubleshooting
Problem a
Existe poco flujo de agua. /
There is slow water flow.
Las válvulas angulares no están totalmente abiertas.
La salida está floja.
/ The
La tuerca espárrago no está
output is loose.
Hay fuga en las
Posiblemente no estén firmemente apretadas.
conexiones.
/ There are
leaks in the connections.
Participa en nuestros
cursos gratuitos
de capacitación.
Enter our free
training courses.
Recomendaciones de Limpieza / Cleaning Recommendations
Es muy importante seguir las siguientes instrucciones para conservar los
acabados de los productos HELVEX, con brillo y en perfecto estado:
1. Utilice únicamente agua y un paño limpio.
2. No utilice fibras, polvos, abrasivos, ni productos químicos.
3. No utilice objetos punzo-cortantes para limpiar los acabados.
4. Se recomienda realizar la limpieza de su producto diariamente.
Nota: Vea nuestros tips en la pag. www.helvex.com.mx
HELVEX, S. A. DE C.V. Calzada Coltongo 293, Col. Industrial Vallejo 02300 Del. Azcapotzalco, México, D.F . T el. (55) 53-33-94-00.
Causa
La presión de operación no es la adecuada.
operating pressure is not the adequate.
Shutoff valves are not tully open.
apretada./ The shank nut is
not tight.
not tight.
Comunícate:
Contact:
En la Ciudad de México:
In Mexico City:
01 55 53 33 94 00
Ext. 5804, 5805 y 5806
/ The
Verifique que la presión mínima de operación sea 0,6 kg/cm²
Verifique que la presión mínima de operación sea 1 kg/cm².
Verify that the minimum operating pressure is 0,6 kg/cm ²
Verify that the minimum operating pressure is 1 kg / cm ².
Abrir totalmente las válvulas angulares. (Pag. 3, paso 15)
/
Instalación general.
step 15) General installation.
Apriete firmemente la tuerca espárrago (Pag. 2, paso 4).
Tighten the nut shank (Page 2, step 4).
Apriete firmemente la conexión. (Pag. 2, paso 7) Instalación
/ Possibly
de mangueras.
/ Tighten the connection. (Page 2, Step 7)
En Monterrey:
In Monterrey:
En Guadalajara:
In Guadalajara:
(0181) 83 33 57 67
(0181) 83 33 61 78
(0133) 36 19 01 13
It is very important to follow the instructions below to preserve HELVEX products
finishes, shiny and in perfect condition:
1. Use only water and a clean cloth.
2. Do not use fibers, powders, abrasives, or chemicals.
3. Do not use sharp objects to clean the finish.
4. It is recommended to clean your product daily.
Note: See our tips on: www.helvex.com.mx
Solución
/ Fully open shutoff valves. (Page 3,
Install hoses.
/
6

Publicidad

loading