Specifications - Textron Greenlee Utility F20 Manual Del Usuario

Specifications

Portable Power Unit
Weight (dry) .............................................. 118 kg (259 lb)
Height
Handles up .............................................102 cm (40 in)
Handles down ..........................................81 cm (32 in)
Length
Handles up .............................................107 cm (42 in)
Handles down ..........................................86 cm (34 in)
Width ............................................................79 cm (31 in)
Fuel Capacity .............................................12.5 l (3.3 gal)
Hydraulic Oil Capacity ................................11.7 l (3.1 gal)
Rated Flow (variable) ............19 to 38 l/min (5 to 10 gpm)
Operating Pressure .............................. 138 bar (2000 psi)
Type of Hydraulic System .............................Open-center
Pressure Port
(3/4-16 SAE O-ring Boss) ............. HTMA male coupler
Return Port
(3/4-16 SAE O-ring Boss) .......... HTMA female coupler
Filtration .............................................10 micron (nominal)
Battery—Automotive Type (sealed lead acid battery)
Honda Air-cooled Gasoline Engine Model GX630
Horsepower (maximum) ......................20 hp @ 3600 rpm
Torque (maximum) ........................... 44.13 Nm (32.5 ft-lb)
Greenlee / A Textron Company
Hydraulic Schematic
PUM P
Recommended Hydraulic Fluids
Any non-detergent, petroleum-based, hydraulic fluid
which meets the following specifications or HTMA
specifications may be used.
S.U.S. @
38 °C (100 °F ) .............................................. 140 to 225
@ 2500 rpm
99 °C (210 °F) ............................................ 40 minimum
Flash Point ................................ 170 °C (340 °F) minimum
Pour Point .................................. -34 °C (-30 °F) minimum
6
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
F20 Portable Power Unit
PRESSURE
PORT (P)
RETURN
PORT (T)
PRESSURE RETURN
PORT (P) PORT (T)
CONTROL
VALVE
OIL
COOLER
RELIEF
VALVE
138 bar
(2000 psi)
FILTER
(10 micron)
ENGINE
TYPICAL
TOOL
POWER
UNIT