Safety Symbols - EGO BH1001 Manual Del Operador

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger. The
instructions and warnings they give are no substitutes for proper accident prevention
measures.
WARNING:
Operator's Manual, including all safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to following all instructions listed below
may result in electric shock, fire, and/or serious personal injury.
4
56V LITHIUM-ION BACKPACK LINK — BH1001
Be sure to read and understand all safety instructions in this
WARNING:
objects being thrown into your eyes, which can result in severe eye
damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shields and a full face shield when
needed. We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always use eye
protection which is marked to comply with ANSI Z87.1.
The operation of any power tool can result in foreign