Pt-850Bc Body-Pack Transmitter; Optional Accessories; Installation & Basic Operation; Us-902Dc Receiver - Optimus US-902DC Manual De Instrucciones

US-902DC
Wireless Receiver

3.3 PT-850BC Body-pack transmitter

(1) Mic. Input (mini 4 pin XLR socket)
(2) Power ON/OFF switch
(3) Antenna
(4) LED indicator for power and battery status
(5) Channel selector
(6) Battery tray
(7) Sensitivity selector
(8) Carry case
(9) Belt-loop
(10) Plastic screwdriver
(11) Battery tray cover

3.4 Optional accessories

(1) CM-501 Condenser lavaliere microphone.
(2) CX-504 Condenser headset microphone.
4. INSTALLATION & BASIC OPERATION

4.1 US-902DC Receiver

4.1.1 Power connector

Plug in one end of AC/DC adaptor cable to DC input socket in the rear panel of receiver, and plug
another end into an AC outlet (Step 1 of Figure 1).
4.1.2

Audio output connector

Connect one end of the AF output cable to the AF output socket in the rear panel, then plug
another end to the "MIC IN" input socket of a mixer or amplifier (Step 2 of Figure 1).
US-902DC equipped with balanced XLR output and unbalanced Φ6,3 mm output, choose the
proper way for use.
US-902DC Version 1.0 Page 4 of 11