Ninja 200 Manual De Uso página 2

Do not pull cord to unplug. To unplug, grasp the
plug, not the cord.
Do not handle plug or appliance with wet hands.
Do not put any object into openings. Do not use with
any opening blocked; keep free of dust, lint, hair and
anything that may reduce airflow.
Do not use without ball float screen in place.
Turn off all controls before unplugging.
Do not use to pick up flammable or combustible
liquids, such as gasoline, or use in areas where they
may be present.
Do not pick up any type of hazardous dust or toxic
materials.
Do not pick up anything that is burning or smoking,
such as cigarettes, matches, or hot ashes.
Do not point spray at yourself or in the direction of
others.
Do not use this machine for dry vacuuming.
Do not operate machine in standing water.
A
FIG. 2: Rear View
A
C
A Solution tank with clear hinged cover
B Wand retention clip
C Vacuum exhaust. Keep clear.
D Product label and serial number
07-02231B 200, 200H
B
D
Immediately unplug power cord from outlet if
machine leaks solution/foam or if machine tips over
while operating.
Release water pressure at accessory tool spray
nozzle before disconnecting solution hose.
Always stop machine on a level surface.
Use extra care when cleaning on stairs. Do not
wheel machine up or down stairs.
Connect to a properly grounded outlet only.
Extension cord must be 12/3 gauge and no longer
than 40 feet. Replace cord if ground plug becomes
damaged.
Do not use additional extension cords with machine.
Do not use machine if not in proper operating
condition.
Do not modify machine from its original design.
Get assistance when lifting machine.
All repairs must be performed by a qualified service
person. Use only manufacturer-supplied or
equivalent replacement parts.
(Fig 2 detail)
E
F
E Separate circuit indicator light (200H only)
F Circuit breaker reset switches (200 has one switch)
2 Ninja