RISCO Group RVNVR04 Manual De Usuario página 10

10. Recording Mode: If "Motion Detected" is selected, the NVR will record only
if motion is detected by the camera. If continuous is selected, the camera
will record continuously.
11. Click Save & Continue. Repeat the procedure for the other cameras until all
cameras you have selected for the NVR are setup. The following screen
provides a summary of the cameras that have been connected successfully
or that failed to be connected to the NVR.
12. For Wi-Fi Cameras, the following screen opens.
Figure 8 Add Camera
Figure 9 Connecting to Wi-Fi
10