Renew PLUS Serie Manual De Instalación página 13

OPERATION
(continued)
SOFT WASH
• Press SOFT WASH for lower seat temperature and water pressure in
a forward nozzle position . Press REAR WASH or FRONT WASH to
move the nozzle forward and backward .
NOTE: When SOFT WASH mode is activated, seat temperature will be one step
lower than usual. INTENSE WASH function will not operate during the operation of
SOFT WASH function.
SEAT TEMP
• Press SEAT TEMP to control 4 temperature settings
(Off / Low / Med / High) of the seat .
WATER TEMP
• Press WATER TEMP to control 4 temperature settings
(Off / Low / Med / High) of the water .
ECO MODE
• AUTOMATIC ECO MODE – Press ECO MODE until
blue light stays on . Seat will be kept at 89 .6˚F (32˚C) .
If SEAT TEMP is off, it will remain off .
• INTELLIGENT ECO MODE – Press ECO MODE until red light stays on . Seat
will be kept at 89 .6˚F (32˚C) when it is not occupied and raise back to preset
level according to memorized time of use . It may take 5-7 days for the unit to
memorize usage pattern .
• TURN OFF ECO MODE – Press ECO MODE until light turns off to release energy
save modes .
NOTE: This unit adopts instant heating technology for water heating and does not
consume the energy for water heating when unit is in stand by mode.
LOW TEMPERATURE BURN PROTECTION
• To reduce the chance of low-temperature burns, the seat has an auto adjustment
which turns to low temperature 89 .6˚F (32˚C) when seat is occupied for more than
15 minutes consecutively .
www.RenewSeats.com
Off (no light)
Low (blue)
Medium (pink)
High (red)
Off (no light)
Low (blue)
Medium (pink)
High (red)
Automatic (blue)
Intelligent (red)
13