Setting Up; Important - Adam Equipment ATP Manual Del Usario

EN

SETTING UP

2.

IMPORTANT

Clean the print head regularly to avoid poor print quality, only attempt to clean
when the printer is off and the head has had time to cool. Clean with a soft
cloth using diluted alcohol.
Avoid extremes of temperature. Do not place in direct sunlight or near air
conditioning vents.
Make sure the scale is located on a strong table and free from vibration.
Avoid unstable power sources. Do not use near large users of electricity
such as welding equipment or large motors. Do not mix batteries and use
only the factory approved power adapter supplied with the machine. Do
not use batteries and the DC adapter at the same time.
Keep free from vibration. Do not place near heavy or vibrating machinery.
Avoid high humidity that might cause condensation. Keep away from
direct contact with water. Do not spray or immerse the scales in water.
Do not place near open windows, air‐conditioning vents or fans that may
cause a draft and unstable readings.
Avoid operating in high static areas, or weighing high static materials, such
as plastics or powders, as this may damage electronics and affect
measurements. Use grounding mats or bonding straps to reduce potential