Saba LD32V167 Manual De Instrucciones página 73

Options and functions of the TV menu
Content of Sound menu
Volume
Equaliser
Balance
Headphone
Sound mode
AVL (Automatic
Volume Limitation)
Digital output
Content of the Settings menu
Conditional access
Language
Parental control
Timer
Record settings
Date/Time
Sources
Other settings: Displays other television setting options:
OSD display time
Encoded channels
search
Blue Screen
Software update
Application version:
Hearing-impaired
Audio description
TV Automatic
shutdown
Standby search mode
(optional)
Adjusts the volume level.
You can choose from 4 pre-set modes or make your own settings by selecting the
user mode.
This parameter is used to highlight the balance of the left or right loudspeakers.
Adjusts the volume of the headphone.
You can choose stereo or select language in dual -I or dual -II mode if the
transmission includes this option. .
This function is used to limit the volume differences between programmes.
To be adjusted depending on the type of appliance attached to this plug.
Controls the conditional access modules when they are available.
Configures language parameters (can vary depending on the country chosen). The
favourite parameters and current ones will be available. The current settings can only
be edited if the broadcaster takes charge of them.
Enter the correct password to edit parental control settings. You can easily adjust
menu lock and parental control from this menu. You can also enter a new pin code
(See the chapter on setting of parental parameters on page 12).
This function is used to set sleep mode and to program recordings made on your
USB device.
Displays the record settings menu, accessible if your (USB device is connected.
Selects the date and time.
Enables or disables selected Source options.
Defines the menu display time.
When this parameter is enabled, the search process locates scrambled channels
as well.
In Active mode, it displays a blue screen when there is no signal.
Updates the software package of your television.
Displays the software version of your television.
Enables specific functions for the hearing-impaired broadcast by the channels.
Audio description refers to an extra narration path reserved for the visually and
hearing impaired. You can only use this option if the broadcaster takes it in charge.
Note: The audio sound description functionality cannot be available during recording or
when the time- lag mode is active.
When this function is enabled, it defines the time at which your television automatically
stops (between one and six hours).
If the Standby search mode is enabled, available channels will be searched when
the television is on standby. If the television finds missing or new channels, a menu
screen is displayed, asking if you wish to apply these changes or not. The channels
list is updated and edited after this process.
English - 71 -