Configuration Menu; Pairing Up With Mobile Phones Or Other Bluetooth Devices - Nolangroup n-com R Serie Manual De Instrucciones

5

CONFIGURATION MENU

All Bluetooth pair ups and other adjustments are carried out in this mode.
To put the system in "Configuration mode" (starting from a switched off system) press the "n" key and keep it
pressed for 4 seconds, until you hear the voice announcement " Configuration Menu ".
Once in the "Configuration" menu, press the "" and ""keys to scroll through the various menu items. In the
items marked with an "*", it is possible to enable / disable the function or carry out the commands by pressing
the "n" key to confirm.
The following items make up the "Configuration" menu:
A. Mobile phone pairing (chapter 6)
B. Intercom pairing (chapter 12)
C. Universal Intercom pairing (chapter 13)
D. Second mobile phone pairing (chapter 8)
E. Speed dial* (chapter 7.1)
F. Smart Navi System (chapter 9)
G. Delete all pairings*
In order to delete all Bluetooth pair ups stored in the device, press the "" or "" key until you hear the
voice announcement " Delete all pairings ".
Press the "n" confirmation key to delete all Bluetooth devices stored in memory.
H. Reset*
In order to restore the factory settings of the device, press the "" or "" key until you hear the voice
message " Factory Reset ".
Press the "n" confirmation key to restore all the factory settings of the device.
I. Exiting the configuration*
To exit the "Configuration" menu, press the "" or "" key until you hear the voice announcement " Exit
the configuration ".
Press the "n" confirmation key to exit the "Configuration" menu.
If no key is pressed within 10 seconds, the device automatically exits the "Configuration" menu.
6

PAIRING UP WITH MOBILE PHONES OR OTHER BLUETOOTH DEVICES

 Make sure the B601 is turned off.
 Put the system in the "Configuration" mode: press the "n" key and keep it pressed for 4 seconds, until you
hear the voice announcement " Configuration Menu ".
 Press the "" key to access the "Mobile phone pair up mode".
Turn on the search for Bluetooth devices (smartphone, GPS, MP3 reader) on the device.

Select the N-Com device. If a password is requested, enter 0000 (four zeros).

Connection between the two devices is established after a few seconds.

Note: The affiliation is stored in the helmet and in the cell phone and it is not lost when the two devices are
turned off. As a result it needs to be carried out only once.
Automatic Connection
Manual Connection
Once the Bluetooth device has been paired up, connection is automatic when the
system is turned on.
In case connection is not automatically initiated after a few seconds, you can
connect from the Bluetooth device or by pressing "n" and keep it pressed for
about 2 seconds.
15