oneConcept 10031080 Manual Del Usuario página 8

1. Put the machine on the horizontal and then turn on the power switch.
2. Select the count mode.
This machine can work in two ways: free count and batch count mode .The count
mode can be selected by presetting the batch number.
Free Count Mode
In this mode, the machine counts all the coins in the hopper with no stoppage until one
of coins receiving slot is full. This mode machine will preset the Batch Number itself when
power up.
Batch Count Mode
In this mode, the machine counts a batch coins according to the presetting number. This
count mode will be set by presetting an expected number on the Batch Number Display.
Before counting, please use the "SET" KEY to select which kind of the coins you want to
preset and then use "+","-" and "BAT" KEY to preset the expected number.
3. Put the coins to the hopper, and the coins should not be piled up higher than the
top of the shunting stick one time and then it press the "START&STOP" KEY to start
counting.
4. When finish counting, please press the START&STOP KEY to stop the machine, or it
will auto stop after about 20 seconds.
5. If you want to get the result of each kind coins, press the "Report" Key and then the
machine will display the individual number for the each kind of coins, and then press
"C" KEY it will return to display total value of all the coins.
8
Operation